How To Disassemble a Squirrel Buster Bird Feeder and clean it?

We earn a commission if you make a purchase via our site, at no extra cost to you.

I am sure you hear the name squirrel buster bird feeder if you are familiar with bird feeders. The squirrel buster bird feeder has enough reputation for keeping squirrels away from any yards. So, many people want to keep them in top-list when selecting a squirrel proof bird feeder.

However, if you own the feeder or any other feeder, you must keep them clean. Otherwise, over time, mold and bacteria can build up in the feeder, leading to birds’ health issues. For the cleaning purpose, you need to disassemble a squirrel buster bird feeder. The guide below will provide you with an in-depth guide on disassembling and cleaning the squirrel buster.

How To Disassemble a Squirrel Buster Bird Feeder?

Follow the step by step guide to apart the feeder:

Step 1: First, you need to apart the top of the feeder. For this, push the squirrel feeder towards down and turn it anti-clockwise. It will get loose from the other parts and slightly pull it upward, and the cover will take off.

Step 2: After removing the cover, you will notice a yellow center post cap. You just need to pull it to remove it from the feeder.

Step 3: Now, remove the hanger cable, just pull it slightly upward.

Step 4: After removing the top, now go to the base part. You will get a nut beneath the feeder. You need to remove it. After removing the nut, you can easily take the bottom off. 

Step 5: You will notice two clips through the seed ports. You need to depress them to release the mechanism. You do not need to use any tool for this, just get your finger in there and give it pork in and out. The main mechanism will be apart from the seed container.

If you have a squirrel buster standard feeder, you need to remove the nut, and then you will notice three screws in the bottom. You just need to untighten the screws and apart from the seed tube.

You successfully remove all of the parts, and now it is ready to go through the cleaning process.

How to clean a squirrel buster bird feeder?

Follow the below step by step guide to clean the feeder:

You should need:

Step 1: Remove any remaining seed from the seed tube and properly apart all the parts. Sometimes, you might notice seeds in the seed ventilation system. You need to remove them using a toothpick.

Step 2: Now, you need to soak all the feeder parts in a 1 to 10 bleach solution and keep it for around 15 minutes. Then, remove it.

Step 3: Now, transfer all the parts into a bowl that contains warm soapy water and scrub it properly using the brush. You need to do the process thoroughly. You need to do this properly for a few minutes. Provide special care to the seed container.

Step 4: Again, transfer its tap water and wait for 5 to 10 minutes. Then, remove it from the water and let dry all the parts before you refill it. You assemble all the parts together and fill them with birds’ favorite food.

How frequently should you clean a squirrel buster bird feeder?

Keep clean the bird feeder is important to keep birds safe from any diseases. Generally, you should clean a squirrel buster bird feeder every two to three weeks which is a good practice. You do not exclude the time of more than one month.

A freelance designer, writer, and content marketer who also loves to spend her leisure watching wild birds and improving her garden and balconies making safe heaven for birds.

Leave a Comment